Water Heating

HEAT OUTPUT - Type 1 Model
 HEAT OUTPUT - Type 2 Model
Apollo
10
90,000 Btu's/HR
Apollo 10
75,000 Btu's/HR
Apollo
25225,000 Btu's/HR
Apollo25
200,000 Btu's/HR
Apollo
50450,000 Btu's/HR
Apollo
50400,000 Btu's/HR
  
Approximate figures only, dependant on type and volumes of materials burnt

                                               



    

TYPE 1: Used when water only is required, excellent heat transfer is obtained cooling the incinerator.

 


TYPE 2: This method is used when both hot air and water are required or if a high output of hot water is required. Output can be readily varied during manufacture by altering specifications.

Due to the infinite variations of waste disposal quanities and heat requirements, we can advise the most suitable set up for your purposes. Variations include, Hot Water-Hot Air (heat your water and workspace areas). Type 1 and Type 2 combined water heaters (heats up to 16 radiators).



PLEASE NOTE: We strongly recommend the plumbing of the unit is installed by a qualified plumber. We advise that units that are sited outside, are protected from the elements. All figures are approximate and dependant solely on type and mixtures of materials burnt.

For a full range of options and sensible, no nonsense advice please contact us.           

Back to Heating